>>> Heathkit_Line
>>> link to Heathkit Catalog 1978
RENAULAC – GREEN OCEAN- Perfeft for Heathkit cabinet. In France: BRICO-DEPOT
DX60 with external VFO. Fine for AM
LINKS:
HW101
To repair it i use some tips. Cut 17cm. 
A new box !
>>>> LINK TO Heathkit_HW-101_review_FR
HW32
Find in some Hamfest in bad conditions. But after some hours they are alive and in good health !
Some HW32 to play on 20m. One is modified to explore the US and Europe band and also CW. One have a nice Knob. All are runig with HP23.
LINKS:
Heath_Company_HW-32_service_manual
OTHERS LINKS:
HEATHKIT_QST_May_1966_p74 HW32
HEATHKIT_Putting_the_HW-12_on_160m_73_196901
HEATHKIT_Modifications_for_the_HW-12_HW-22_and_HW-32_73_196711
HEATHKIT_Heathkit_HW-22_Transceiver_73_196401
HEATHKIT_Put_your_HW-22_on_CW_73_196605
HEATHKIT_Heathkit_HW-32A_Transceiver_73_196705
HP23 Power supply
HW7
Brrrrr…. not so good
LINKS:
https://jclaudegerwill.wordpress.com/2012/05/10/a-propos-du-hw7/
http://www.qsl.net/kk4kf/heathkit.html
HW8
Better than the HW7
SB201
500W with two 572B – 80m to 15m
SoftKey:
LINKS:
SB-200 Restoration and ModificationsWA3DSP
SB610
SB650
HW-101 Interfaces
All connections are made at the cathodes of the various oscillator tubes.
All connections are made through a 27pF cap and RG-174 coax. 27 pf was found to provide adequate coupling without loading any stage.
HFO connection at pin 7 of V11
VFO connection at pin 7 of V12
BFO connection at pin 9 of V13
Bypass (Jumper out) the input .01 and the 1 K resistor on the HFO input circuit of the counter if it will not count above 15 meters.
Keep cables as short as possible.
LINKS>>>>
Heathkit SB-650 frequency display
And several « toys » from Heathkit
MODIFICATIONS ON HEATHKIT – QST
Compiled by Keith Rowland [k4kgw@MINDSPRING.COM]
Thanks Keith!
--------------------------------------------------------------------------------------------
DX-60B Transmitter.
1. DX-60 Switch Replacement, Sep 87, p. 43
2. DX-60 Switch Update, Sep 88, 48
DX-100 Transmitter
1. Heath DX-100 Keying, Aug 77, 49
2. "Feedback" on DX-100 Keying, Sep 77, 51
HA-201 VHF Amplifier
1. HA-201 COR, Jul 78, 32
2. "Feedbacl" on HA-201 COR, Nov 78, 32
HA-201A 2-Meter Amplifier
Higher Power from the Heath 201A 2-Meter Amplifier, Jul 82, 37
HD-10 Keyer
1. HD-10 Speaker Change, Mar 72, 52
2. HD-10 Keyer Modification, Feb 74, 41
3. HD-10Positive KeyLine, Jul 78, 34
4. HD-10 Squeeze Paddle, Aug 78, 31
HD-1250 Dip Meter
1, HD-1250 Carrying Case, Oct 78, 37
2. Heath HD-1250 Dip Meter, Improving Response, May 79, 48
HD-1410 Keyer
1. Ideas for theHD-1410 and other Keyers, Nov 79, 57
2. External Paddles for the Heath HD-1410 Keyer, Oct 80, 25
3. Solid State Rigs and the Heath HD-1410 Keyer, Apr 83, 38
HG-10 VFO
HG-10 VFO Output, Jul 76, 42
HM-102 2-KW Wattmeter
1. Heath HM-102, Added Switch, Feb 77, 43
2. Heath HM-102, Extra Meters, May 78, 38
HM-2140 Dual HF Wattmeter (2-KW), Feb 80, 40
HM-2141 300-Watt VHF Wattmeter, Sep 80, p.41
HP-23 Power Supply
1. Improved Ground Connection on the HP-23, May 74, 49
2. Heath HP-23, Low Low-Voltage, Oct 77, 46
HR-1680 5-Band SSB/CW Receiver
1. HR-1680 Receiver Modifications—Try Them!, Nov 82, 22
2. Using the Heath HR-1680 Receiver as a CW Monitor, Oct 88, 39
HW-7 QRP Transceiver (40-20-15 Meters)
1. Heath HW-7 Preselector Modification, May 73, 42
2. New Front End for Heath HW-7, Dec 73, 23
3. HW-7 QRP Transmitter Modifications, Jan 74, 35
4. RIT for the HW-7, Jul 75, 38
5. Slippers for the HW-7 and HW-8, Dec 75, 45
6. HW-7 Hum Reduction, Jul 76, 42
7. HW-7 Sidetone Level Control, Nov 76, 41
HW-8 QRP Transceiver (80-40-20-15 Meters)
1. Slippers for the HW-7 and HW-8 Transceivers, Dec 75, 45
2. Full Break-In and RIT for the HW-8 QRP Transceiver, Jul 77, 22
3. “Feedback” on the RIT article above, Nov 77, 20
4. Heath HW-8 Items, Mar 78, 36
5. HW-8 RIT, Jan 78, 40 and Dec 78, 38
6. Putting the Boots to Your HW-8 QRP Transceiver, Apr 79, 15
7. An S-Meter for the Heath HW-8, Nov 79, 57
8. HW-8 and the Accu-Keyer—A Good CW Team, May 81, 46
9. HW-8 Ideas, Jan 81, 45
10. 30-Meter Conversion for the HW-8, May 84,44
HW-9 QRP Transceiver (80-40-20-15 Meters)
1. Improving the HW-9 Transceiver, Apr 88, 26
2. HW-9 Tips, Dec 88, 32
3. HW-9 Tips, Oct 88, 43
HW-12 80-Meter Transceiver
Heath HW-12, QRP, Sep 77, 45
HW-15
1. Modifying the HW-15from 15 to 20 Meters, Nov 75, 35
2. HW-16 CW Transceiver (80-40-15 Meters)
3. Putting the HW-16 on 20 Meters, Aug 72, 51
4. Adapting VFOs for the HW-16, Nov 74, 20
5. Heath HW-16 Sidetone Level Adjust, May 77, 48
6. Help for the HW-16, Aug 79, 50
HW-22 40-Meter Transceiver
Extended coverage for the HW-22, Oct 74, 39
HW-22A 40-Meter Transceiver
Extending the HW-22A Frequency Coverage, Jun 71, 37
HW-100 80-10 Meter Transceiver
1. The HW-100 and ½, Nov 71, 20
2. Deactivated CW Operation with the HW-100, Jan 74, 47
3. HW-100/HW-101 Relay Holding, Apr 79, 44
HW-101 80-10 Meter Transceiver
1. Tone Oscillator Repair on the HW-101, Sep 72, 53
2. Heath HW-101, Better Looking Dial, Feb 77,43
3. HW-101, VOX Relay Response During CW Operation, Jan 77, 44
4. HW-101 Modification Update, Aug 75, 49
5. WWV on the Heath HW-101, Aug 77, 49
6. Feedback on WWV Modification, Sep 77, 51
7. Heath HW-101 CW, Mar 78, 41
8. HW-100/101 Relay Holding, Apr 79, 44
9. HW-101, Eliminating TVI< Aug79, 50
10. Modifying the Heath HW-101 for Zero-Beating, Feb 81, 47
11. Improved Carrier Suppression for the HW-101, Oct 82, 43
12. Reducing HW-101 Sidetone Volume, Jun 81, 36
13. HW-101 Oscillation Problem, Mar 83, 42
14. HW-101 Troubleshooting Chart, Feb 83, 54
15. Eliminating Dial-Drive Clutch Slippage in the HW-101, Mar 88, 41
HW-104 Solid-State Transceiver(80-10 Meters)
1. Heath HW-104/SB-104 RIT Modification, Jan 80, 54
2. Adding RIT tothe HW-104 or SB-104 Transceiver, Jan 80, 16 and
Feedback, Mar 80, 49
HW-202 2-Meter Transceiver
1. HW-202 Owners, Beware!, Sep 75, 45
2. Protecting Transistors in the HW-202, Aug 75, 49
3. HW-202 Remote Control, Oct 76, 40
4. Tone Pad Connection for the HW-202, Jan 76, 43
HW-1982 Micoder
New Battery Improves Micoder Quality, Apr 79, 44
HW-2036 2 Meter Transceiver
1. Two Changes, Heath HW-2036, Oct 77, 46
2. HW-2036 Channel Switch Visibility, Aug 78, 51
HW-5400 Solid State Transceiver With WARC Bands
1. Improving RIT and Split-Frequency Operation in the Heath HW-5400
Transceiver, Sep 88, 42
2. HW-5400 SpeedyTune, Sep 88, 43
HX-1681 CW Transmitter
1. Mar 81, 48
2. Alignment, Dec 85, 50
IB-5281 RCLBridge
1. Chart for Heath IB-5281 RCL Bridge, Dec 80, 47
2. Dec 80, 47
IM-103
Heath IM-103; Keeping RF Out, Jan 77, 44
IM-104
Heath IM-104 Modification Prevents Pegging, Apr 77, 56
IM-2215 Hand-Held Digital Multimeter, Jun 80, 45
SA-1480 Remote Antenna Switch
1. Jul 80, 43
2. TVI From the Heath Remote Coaxial-Cable Switch, Sep 82, 42
3. Increased Control Voltage for the Heath Remote Antenna Switch, Jan 83, 46
4. Lubrication for the Heath Remote Coax Switch, Mar 83, 41
SA-5010 Micromatic Keyer
1. Heath SA-5010 Micromatic Keyer Modifications, Jul 82, 39
2. Heath SA-5010 Keyer Short, Jun 84, 41
3. Heath Micromatic Memory Keyer, Sep 89, 37
SA-7010 Tri-Band Yagi, Aug 80, 45
SBA-101-1 Noise Blanker
More About Adapting the HeathkitSBA-101-1 Noise Blanker, Apr 79, 47
SBA-104-1 Noise Blanker
1. Noise Blanker, Still More on the SBA-1004-1, Aug 77, 33
2. A New Look Noise Blanker That Works, Jan 77, 39 (Not sure if this is about
the 104-1...I don’t have the actual issue this is in)
3. Updating the Noise Blanker, Aug 77, 33 (Also not sure if this is about the
104-1 for the same reason as above)
SB-100 HF Transceiver
Audio Hum in the Heath SB-100, Jun 71, 40
SB-101 HF Transceiver
1. Oscar Reception With the SB-101, Feb 75, 46
2. SB-101 and a Separate Receiver, Jan 75, 44
3. Hint for the Heath SB-101 Owners, Sep 77, 44
4. Perking Up Sluggish SB-101, Feb 77, 44
5. Heath SB-101, Faster Relay Response, Feb 77, 43
6. Heath SB-101, Low Sensitivity and RF Drive, Dec 80,53
SB-102 HF Transceiver
1. VOX and ALC Problems with the SB-102, Aug 71, 43
2. Heath SB-102, Birdies, Jun 77, 47
3. Heath SB-102, Eliminating AC Buzz, Feb 77, 44
SB-104 Solid State HF Transceiver
1. Heath HW-104, SB-104 RIT Modifications, Jan 80, 54
2. Heath SB-104 Talk-Back Solution, Dec 80, 53
3. Adding RIT to the HW-104 and the SB-104 Transceivers, Jan 80, 16, and
“Feedback,” Mar 80, 49
3. Refining the SB-104, Mar 82, 20 and “Feedback,” May 82, 43
SB-104A HF Transceiver
Improving the SB-104A/SB-644A, Aug 79, 28 and “Feedback,” Sep 79,23.
Also Hints & Kinks, May 80, 41
SB-200 Linear Amplifier
1. Instant Break-In for the Heath SB-200, Mar 81, 52
2. An Improved Circuit for Connecting the SB-200 Amplifier and
Solid-State Transceivers, May 89, 48
SB-220 Linear Amplifier
1. SB-220 on 6 Meters, Dec 74, 47
2. SB-220 Modifications, Nov 78, 40
3. On Upgrading Your SB-220 Linear Amplifier, Nov 79, 56. Also:
“Feedback,” Apr 79, 27, and “For the SB-220,” Jul 79, 50
4. Comments on Heath SB-220 Modification, Feb 80, 44
5. All Solid-State QSK for the Heath SB-220, Jan 80, 25
6. No Holes Standby Switch Modification for the Heath SB-220/SB-221
Amplifier, Sep 88, 45
7. Using the Heath SB-220 Amplifier with Solid-State Transceivers, Jan
88, 45
8. Improving the SB-220 Amplifier, Feb 89, 42
9. Circuit Improvements for the Heath SB-220 Amplifier, Part 1, Nov 90,
25. Paret 2: Dec 90, 41
SB-230 Linear Amplifier (80 thru 10 meters)
1. Tuning Aid and Protection Circuits for the Heath SB-230, Jan 80, 51
2. TVI and the Heath SB-230, Dec 85, 50
SB-300 80-10 Meter Receiver
Improving Frequency Stability for the Heath SB-300, Nov 75, 37
SB-301 80-10 Meter Receiver
1. Instant Frequency Change; Transceiving with the SB-301 and SB-401,
Jan 70, 28
2. CW Sidetone for the SB-301, SB-303 and SB-401, Jul 79, 49
SB-303 80-10 Meter Solid State Receiver
1. Improving CW Reception on the SB-303, Jul 72, 21
2. The Heath SB-303 and CW Reception, May 73, 39
3. CW Sidetone for the SB-301, SB-303 and SB-301, Jul 79, 49
4. A Noise Blanker for the Heath SB-303 Receiver, Sep 79, 45
SB-401 80-10 Meter Transmitter
1. Instant Frequency Changing Transceiving with the SB-301 and SB-401,
Jan 70, 28
2. Easy VOX Adjustment for the SB-401, Dec 71, 40
3. Heath SB-401, Relay Hang-Up, Dec 77, 45
4. CW Sidetone for the SB-301, SB-303 and SB-401, Jul 79, 49
SB-610 Monitor Scope
Reducing Baseline Ripple in the SB-610 Monitor Scope, Dec 72, 46
SB-614 Monitor Scope
Extend the Versatility of Your Heath SB-614 Monitor Scope, Jan 82, 36
SB-630 Station Concole
Heath SB-630 Digital Clock Modification, Dec 76, 42
SB-650 Frequency Display
1. Using the Heath SB-650 with other than Heath Transceivers, Jan 73,
52
2. Using the Heath SB-650 Frequency Display with the Yaesu FT-101, Mar
77, 24
3. Heath SB-650 with Allied AX-190, Sep 78, 37
SB-1000 Linear Amp
1. SB-1000 Comments, Jul 88, 47
2. Step-Start for the Heath SB-1000 Linear Amplifier, Jun 96, 69
VF-1 VFO
New Life for the Heath VF-1, VFO, Dec 72, 18
1. Cantenna Oil, Aug 70, p. 53
2. Fuse Protection for the Heath Line-Voltage Monitor, Nov 73, 51
3. 117-230-volt Selector Switch for Heathkit Power Supplies, Mar 73, 57
4. The Heath Digital Multimeter Handle, Tech Correspondence, Mar 73, 47
5. Adapting VFOs for the HW-16, Nov 74, 20
6. Heath VFO Dial Slippage, Sep 76, 39
7. PEP Wattmeter-a la Heath, Dec 76, 32
8. Heath Micoder, Jan 78, 39
9. Heath SB-series, Better S/N and Gain, Jun 78, 44, and Feedback, Oct 78, 14
10. Adapting the Heath Noise Blanker to Older 75S-series Receivers, Dec 79, 57
11. Zero Dial Mod for the Heath SB-series, Feb 80, 44
12. Fading Audio from the Heath Micoder II, Spr 82, 53
13. Using the Heath 1410 Keyer with the Ten-Tec Argosy, Jul 82, 38